10BASE5
10BASE5 (also known as thicknet) is the original "full spec" variant of
Ethernet cable, using special cable similar to RG-8/U
coaxial cable. This is a stiff, 0.375 inch (approx. 9.5 mm) diameter cable with an impedance of 50
ohms, a solid center conductor, a foam insulating filler, a shielding braid, and an outer jacket. The outer sheath is often yellow-to-orange/brown foam
fluorinated ethylene propylene (for fire resistance) so it frequently is just called "yellow cable", "orange hose", or sometimes humorously "frozen yellow garden hose". The name 10BASE5 is derived from several characteristics of the physical medium. The 10 refers to its transmission speed of 10
Mbit/s. The BASE is short for
baseband signalling as opposed to
broadband, and the 5 stands for the maximum segment length of 500
metres (approx 1600 feet).
See more at Wikipedia.org...
10BASE5
10Base5
10Base5, auch Thick
Ethernet, Yellow Cable, Thicknet oder Thickwire genannt, ist eine der ersten
Ethernet-
Netzwerktechnologien.Für 10Base5 wird ein 10 mm dickes
Koaxialkabel (RG-8) mit einem
Wellenwiderstand von 50 Ohm verwendet. Zum Anschluss von Geräten muss mittels einer Bohrschablone ein Loch in das Kabel gebohrt werden, durch das ein Kontakt einer Spezialklemme (Vampirklemme) des
Transceivers eingeführt und festgeklammert wird. An diesen Transceiver wird mittels der AUI (
Attachment Unit Interface)-Schnittstelle über ein Verbindungskabel die Netzwerkkarte des Computers angeschlossen. Dieser Standard bietet 10 Mbit/s Datenrate bei Übertragung im Base-Band und 500 m Reichweite mit maximal 100 Teilnehmern. Die Leitung hat keine Abzweigungen, und an den Enden sitzen 50 Ohm
Abschlusswiderstände. Aufgrund der früheren weiten Verbreitung ist 10Base5 noch immer in einigen Systemen in Benutzung.
Mehr unter Wikipedia.org...
10BASE5
© W niniejszym artykule wykorzystano materialy pochodzace z
Wikipedia® i posiada on Powszechna
Licencje Publiczna GNU
10Base5
Specifica di
livello fisico dello standard
IEEE 802.3, caratterizzata da velocità di trasmissione di 10 Mbps in banda base e da segmenti di cavo di lunghezza non superiore ai 500 metri.Utilizza
cavo coassiale RG8, in una topologia a
bus. L'RG8 è un cavo spesso e pesante, ma consente di collegare fino a 100 stazioni per segmento. Le stazioni sono collegate al cavo attraverso un dispositivo detto transceiver, fissato al cavo tramite ingombranti e scomode
spine a vampiro, che forano le guaine plastiche del cavo fino a raggiungerne il cuore. Il transceiver converte i bit in uscita da una stazione in impulsi nel cavo, e viceversa. Tratti più lunghi possono essere ottenuti attraverso l'uso di dispositivi di ritrasmissione detti
repeater, che amplificano il segnale in arrivo da un segmento e lo ritrasmettono su quello successivo. Non è però possibile collegare più di quattro segmenti consecutivi.
Per saperne di più visita Wikipedia.org...