Volt-ampere
A volt-ampere in electrical terms, means the amount of
apparent power in an
alternating current circuit equal to a
current of one
ampere at an
emf of one
volt. It is equivalent to
watts for non-reactive circuits. Hence;10 kVA = 10,000 watts capability (where the
SI prefix k equals kilo)10 MVA = 10,000,000 watts capability (where M equals mega)While the volt-ampere and the watt are dimensionally equivalent one may find products rated in both VAs and watts with different numbers. This is common practice on
UPSs (Uninterruptible Power Supplies). The VA rating is the
apparent power that a UPS is capable of producing, while the watt rating is the
real power (or true power) it is capable of producing, as opposed to
reactive power. Reactive power arises due to the effects of
capacitance and
inductance of components in the load to be powered by the AC circuit. In a purely
resistive load (
incandescent lights for example), the apparent power is equal to the true power and the amount of VAs and watts used would be equivalent. However, in more complex loads, such as computers (which UPSs are intended to power) the apparent power used (VAs) will be larger than the true power used (watts). The ratio of these two quantities is called the
power factor.
See more at Wikipedia.org...
KVA
Le kVA est un acronyme qui signifie kilovoltampère, le facteur 1000 du voltampère. Elle désigne une puissance apparente et s'apparente au
kiloWatt (kW) et à la puissance réactive (vAR), mais cela n'a aucun sens d'additionner des puissances actives, des puissances apparentes et des puissances réactives, c'est pourquoi les unités sont différentes.
Pour la suite, voir Wikipédia.org…
KVA
KVA
Quilovoltampere
Quilovoltampere (kVA) é uma unidade de medida correspondente a 103
voltamperes.1 kVA = 1 000 VAVA Significa volt-ampère, o VA é o que chamamos de potência aparente, ela ó o resultado de uma soma fasorial (vetorial) da potência ativa em watts (W) e da potência reativa var (var). O watt é a potência que gera trabalho útil, e o var é a potência de magnetização ou de capacitância de um dado equipamento. Esta potência não gera trabalho útil para o consumo final, e pode ser corrigido. Resumindo, o var e o watts são os catetos e o VA será nossa hipotenusa. Pode usar a formula VA²=W²+var². Nos equipamentos em geral, temos os dados do fator de potência (FP), que nada mais é do que o cosseno do ângulo entre a potência ativa e a potência aparente. Se você tiver o fator de potência deste seu equipamento, basta multiplicá-lo por sua potência aparente VA. FP= W Exemplo: Digamos que este seu equipamento de 2 kVA tenha um fator de potência de 0,85. Ai teremos: 2000 VA . 0,85= 1700W ou 1,7 kW.
Veja mais na Wikipédia.org...