10BaseT

There are several standards for Ethernet over twisted pair or copper-based computer networking physical connectivity methods. The currently most widely used of these are 10BASE-T, 100BASE-TX, and 1000BASE-T, running at 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s (1 Gbit/s) respectively. These three standards all use the same connectors. Higher speed implementations nearly always support the lower speeds as well, so that in most cases different generations of equipment can be freely mixed. They use 8 position modular connectors, usually (but incorrectly) called RJ45 in the context of Ethernet over twisted pair. The cables usually used are four-pair Category 5 or above twisted pair cable. Each of the three standards support both full duplex and half-duplex communication. According to the standards, they all operate over distances of 'up to 100 meters'.
See more at Wikipedia.org...

<networking> A variant of Ethernet which allows stations to be attached via twisted pair cable.
(1995-01-24)